HiSpeed LightSpeed Ultra CT Package -
Refurbished General Electric HiSpeed, 8 slice LightSpeed Ultra Helical Computed Tomography Scanner Consisting of:

High Resolution Scanning Gantry

		Helios 2 LightSpeed Gantry Assy.
		MX-200 Performix Plus 630 CT Tube
		53kW Hi-Frequency Generator
		LightSpeed M-DAS
		Helios Hilight 8 Slice Detector
		Metal Free Table with Metal Free Accessories
		.5 Second 360 deg. Rotation Speed with Variable Speed
		120 Sec per Acquisition Helical
		8 GB Disk Storage
		MOD Drive for Dicom 3.0 Image Storage
		Patient Positioning Table and Slip-Ring Gantry

Patient Positioning Table

		51cm (21 in.) Minimum Elevation
		170cm Scannable Patient Travel
		400 lb Capacity to Performance Specification (450lb max.)

High Voltage Generator/ Power Distribution Unit

		53 kW Generator (400aA Max.)
		kVp Selections - 80, 120 and 140 kVp
		mA Selections - 40 to 400 in 10 mA Increments

Processing Unit

		60 Second Continuous Helical Scanning
		AutoScan, AutoVoice, AutoFilm, AutoArchive
		4.3GB System Disc Stores 3,700 images
		Magnetic Optical Disk Stores up to 3,600 images

Operator Console

H2 Operators console with 2 Color Monitors

Operator Manuals and Phantoms

Complete set of system and QA phantoms

CT Simulation Laser System with Scanning Sagittal Laser

		One (1) ceiling mounted scanning sagittal laser including fixed transverse line in the overhead laser rail and two (2) wall mounted moveable side lasers for use in localizing and marking isocenter planes during virtual simulation procedures.
		"Wilke" installation and quality assurance phantom
		Computer terminal (keypad) placed in the CT room for input of laser functions
		"IsoMark" Windows NT based applications software and Windows NT computer for transmitting, recording and verifying isocenter data. Interface-ready for communication of isocenter coordinates from Pinnacle3 (when and if available) enabling automatic movement of sagittal and wall mounted side lasers. Wall and ceiling mounted laser installation, service and warranty are provided by LAP. Uni-strut may be required for installation. Consultation with LAP engineers is available.
		The clinical facility is responsible for providing suitable electric outlets and wall preparation according to LAP specifications before laser installation may proceed.

Med-Tec IPPS-TI CT Therapy Carbon Fiber Table Insert

		Indexing features standardize patient setup throughout the clinic, from imaging and simulation through treatment.
		Securely attaches to the CT cradle, ensuring repeatable level and orthogonal orientation of the patient.
		Orthogonal and stable patient positioning allows clinician to use CT lasers to place accurate isocenter marks on the patient.
		Extremely durable, lightweight construction of Rohacell foam and carbon fiber is easy to clean and weighs less than 14 kg.
		Low-density surface for easy autocontouring within TPS.
		Divergent non-symmetric aluminum wire fiducials to define data/patient orientation and slice orientation